One-Off BMW M3 in Grigio Telesto Pearl Sits on HRE Performance Wheels

Read Time:1 Minute, 25 Second

The BMW M3 is making a splashing come-back with another standout tuning project added by no other than HRE Performance Wheels tuning company, one of the most important shops in the wheel industry.

As we can depict from the media gallery below, this particular model comes wrapped with the one-off exterior Grigio Telesto Pearl colour which is actually a Lamborghini-based finish. Even so, it does highlight the car`s aggressive design lines.

At the exterior, the BMW M3 by HRE Performance Wheels comes with slight upgrades, consisting of carbon fiber front lip and trunk spoiler, adding updated ceramic brakes with yellow calipers, the brakes being made from the same carbon fiber.

The aero styling couldn’t be complete without the tuner`s in-house built wheels. We are looking here at the HRE P101 alloys, measuring 20×8.5 up front and 20×10.5 in the back, and adding an extraordinary aggressive attitude.

From what we know, there are not any mods carried out under the hood, the model still packing the stock 3.0-liter BMW TwinPower Turbo inline six-cylinder engine, with impressive 431 horsepower and 500 Nm of torque, enough to allow an acceleration from 0 to 100 km/h in 4.3 seconds, when hooked to a six-speed manual transmission.

However, with the seven-speed DCT (Dual Clutch Transmission), the sedan reaches the same sprint in just 4.1 seconds. The top speed is electronically limited at 250 km/h. The model can be best admired in the media gallery below! Would you fit your M3 with some cool wheels courtesy of HRE Performance Wheels?