The F82 BMW M4 is a magnificent piece of German engineering, coming with advanced aerodynamics, cool interior tweaks and plenty of performance under the hood. However, the car`s structure and design allows for in-depth customizations.

This is why, in the hands of aftermarket specialists, the M4 can be crafted in many ways and transformed into a unique car. And with the passing of time, this particular model will finally gain the success it deserves, just like the 1M, which is still a highly-sought model.

For this F82 BMW M4 in question, the owner wanted to enhance it with a carbon fiber package, new wheels and a couple of new inserts inside the cabin. Unfortunately, there weren’t any mods added under the hood, which is a clear indication that it holds just about enough power to withstand other hot rides in the segment.

Performance wise, the F82 BMW M4 packs the same 3.0-liter BMW TwinPower Turbo flat-six, also seen on its little sibling the M3 Sedan. The engine outputs 431 horsepower and 550 Nm of torque, sending the power to the rear via a six-speed manual. The sprint from 0 to 100 km/h is also done in 4.1 seconds, but when hooked with the seven-speed M-DCT transmission, the model runs the same sprint in just 3.9 seconds. The topping is electronically limited at 250 km/h.

As for the wheels it comes with, it involves the Vossen Hybrid Forged VFS-5 rims which measure 20 x 8.5 and 20 x 10.5 front and rear, respectively. Wrapped in Gloss Gunmetal finish, they look impressive in Michelin Pilot Sport + tires.

The new wheels come handy with the Alpine White exterior wrap and carbon fiber package, which consists of new front lip spoiler, rear diffuser or rear deck-lid spoiler, all courtesy of German tuning firm AC Schnitzer.

Further details are provided in the media gallery below. Enjoy!

About Post Author

Marcus M.

http://www.bmwcoop.com

The post F82 BMW M4 with Vossen Wheels appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

While the German based carmaker is just a couple of months from putting the current M3 to sleep, the M4 is getting plenty of appreciation in the tuning segment, receiving programs after programs. With the M3 gone, the coupe sibling will become one of the most iconic aftermarket builds.

The model seen in the media gallery below has received new body parts from Florida-based tuning firm Euro Stable. It wraps the gorgeous Black Sapphire Metallic body wrap and wears the high-performance lightweight set of wheels from ADV.1 Wheels tuner.

The said part is that there weren’t any mods carried out under the hood, even if it features a custom-built exhaust system. This means the 3.0-liter BMW TwinPower Turbo flat-six, also seen on its little sibling the M3 Sedan. The engine outputs 431 horsepower and 550 Nm of torque, sending the power to the rear via a six-speed manual. The sprint from 0 to 100 km/h is also done in 4.1 seconds, but when hooked with the seven-speed M-DCT transmission, the model runs the same sprint in just 3.9 seconds. The topping is electronically limited at 250 km/h.

As for the carbon aero parts, the technicians from Euro Stable have added carbon fiber lip spoiler, carbon rear diffuser with carbon fiber rear deck-lid spoiler.

As for the wheels, they are specifically designed for the track and refer to ADV.1 Advanced Series wheels with an exquisite design featuring the Advanced Window Pocketing queues on each spoke, enhancing the car`s aggressive looks.

The wheels also provide increased grip and better stance, thanks to their massive size – 20 x 9.5 and 20 x 11.5 front and rear, respectively, and finished as well in Brushed Aluminum with Gloss Clear for the wheel face, and Polished Aluminum with Gloss Clear for the lips.

Euro Stable tuner has also released an impressive media gallery with their latest build on Black Sapphire Metallic F82 BMW M4!

About Post Author

Marcus M.

http://www.bmwcoop.com

The post F82 BMW M4 Sits on ADV Wheels, Installation by Euro Stable appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

Thanks to its extremely advanced aerodynamics and aggressive stock design, the BMW M6 has become quite a legend ever since it was first released on the market in 2012; it has also gained prestige in the tuning segment, with plenty of aftermarket projects to reveal its true identity.

Compared to other massive and prominent aero programs, this particular BMW M6 wrapped in Black Sapphire exterior colour is quite modest at the exterior. It only comes with just a bunch of styling details which further enhance its looks.

However, the wheels are completely new story, the model in question coming with the ADV.1 wheels. We are dealing here with the ADV05R Directional M.V2 Competition Spec wheels, with a five-spoke split and directional design, which increase the car`s aggressive wheels.

The wheels are extremely wide, measuring 21 x 9.5 and 21 x 12 front and rear, respectively, providing better grip and adding greater looks, thanks to the Brushed Aluminum with Gloss Clear finish.

As for the power under the hood, this Black Sapphire BMW M6 remains stock, packing a 4.4-liter BMW TwinPower Turbo pot with 560 horsepower and impressive 680 Nm of torque. Just like the BMW X6 M, the M6 also comes with a sprint from 0 to 100 km/h in an impressive 4.0 seconds.

The performance is also achieved thanks to the seven-speed DCT (Dual Clutch Transmission) system which sends the power to the rear wheels. The top speed is also set at 250 km/h. The model can be admired in the media gallery below provided by William Stern Photography. Enjoy!

About Post Author

Marcus M.

http://www.bmwcoop.com

The post BMW M6 in Black Sapphire Sits on ADV.1 Wheels appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

The coming of the BMW i8 on the market around four years have inspired tuning companies all over the world to come up with exquisite programs that shape the plug-in hybrid`s personality and transform it into one of a kind German model.

And slowly but surely, we get to see more and more aftermarket shops applying their skills on different i8 models, fitting them with not only just a handful of updates and wheels, also upgrading them beyond recognition with carbon fiber aero packages.

The latest edition to pop-up on the internet is the below Crystal Pearl White Metallic body wrap, recently coming with the high-performance wheels from ADV.1 Wheels tuning company, a leading shop in the wheel industry.

The wheels involved the tuner`s new edition – the ADV05 M.V2 Competition Spec Series – sized 21 x9 and 21 x 10.5 front and rear, respectively and finished in Matte Gunmetal, which perfectly complement the car` exterior colour.

Besides the new wheels, the engineers ADV.1 Wheels have also installed the well-known H&R Lowering Springs, which lower the car`s ride height for increased stance and advanced driving capabilities. As for the car`s engine under the hood, the tuner have left it stock.

This means that the BMW i8 comes with a I5 three-cylinder turbocharged TwinPower Turbo engine, developing 231 horsepower and sending the power to the rear axle. The conventional mill is coupled to an electric drive system which adds an extra 131 horsepower, all being sent to the front.

With all this sheer power, the plug-in hybrid is capable of sprinting from 0 to 100 km/h in 4.1 seconds, which makes it more outstanding than the M3 or M4. The all-electric range is also set at 35 km, at a topping of 120 km/h, with an overall of 530 km range.

About Post Author

Marcus M.

http://www.bmwcoop.com

The post BMW i8 in Crystal Pearl White Metallic Sits on ADV Wheels appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

The aftermarket specialists from ADV.1 Wheels tuner – one of the best in the wheel industry, now building custom aero parts as well – is back into the spotlights with another tuning program carried out this time on the gorgeous BMW M5.

The program involves the fitting of a new set of wheels along with visual updates, which increase the car`s overall look and provide the model with greater stance.

We are looking here at a new carbon fiver aero package, consisting of a front add-on spoiler, blacked-out kidney grilles, along with carbon fiber spoiler and rear diffuser, the latter one also housing a high-performance exhaust system. These parts were provided from Vorsteiner tuner.

As we can depict from the media gallery below, we are looking here at the fitting of the ADV15R Track Spec CS Directional alloy wheels, sized 21X9.5 up front and 21×11 at the rear end, coming as well with a Matte Bronze finish for the wheel front, and Gloss Brushed Manbronze for the lips.

The alloy wheels are perfectly matching the car`s Black Sapphire Metallic exterior wrap, increasing the car`s aggressive looks an menacing attitude. Also, in case you love the new wheels and want to have it on your F10 BMW M5 then you can have if from around 8,000 euro.

In the engine department, the aftermarket specialists have left the engine intact, meaning the same 4.4-liter V8 turbo petrol engine, with 560 horsepower and 680 Nm of torque, providing a sprint from 0 to 100 km/h in just 4.2 seconds. The car`s top speed is also electronically limited at 250 km/h. However, without the speed limiter, the model can reach as high as 300 km/h.

About Post Author

Marcus M.

http://www.bmwcoop.com

The post F10 BMW M5 Wrapped in Black Sapphire Metallic on ADV.1 Wheels appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

Even if the BMW M3 and M4 might been shadowed by the recent success of the M2 Coupe in the aftermarket world, the models are still finding a lot of appreciation from famous worldwide tuning companies like Vorsteiner or ADV.1 Wheels.

The latter tuner has recently created a unique and special BMW M4 in collaboration with ATT-TEC tuner, both adding exquisite features and good looks. Their common project can be observed in the photo session below created by no other than C-Kraft Photography.

The model seen below wrapping the Alpine White exterior colour, gets to enjoy a lot of new styling bits, with the main highlights on the car`s new carbon fiber front lip spoiler, rear decklid spoiler and rear aero diffuser.

The overall design and wrap are complemented with the new wheels from ADV.1 Wheels tuning, which are finished in Gloss Gunmetal and shape out the car`s personality.

The ADV5.2 M.V2 CS Series are seized 20×9 up front and 20×10.5 at the rear and come with extremely lightweight properties and forged construction, improving the car`s stability and stance.

In the engine department, this Alpine White BMW M4 remains pretty much a stock, with the famous 3.0-liter TwinPower Turbo inline six-cylinder engine, delivering an impressive 431 horsepower and 500 Nm of torque. The car sprints from 0 to 100 km/h in 4.3 seconds with a standard six-speed manual, while the seven-speed M-DCT takes just 4.1 seconds for the same run. The topping is electronically limited at 250 km/h.

Now that we have got ourselves a smashing BMW M4 running on ADV.1 wheels, please enjoy the media gallery put together by C-Kraft Photography!

About Post Author

Marcus M.

http://www.bmwcoop.com

The post BMW M4 in Alpine White Looks Smashing on ADV.1 Wheels appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

The BMW M3 is ending up into the spotlights again, this time the model packing plethora of amenities from different aftermarket specialists like Vorsteiner, ADV.1 Wheels or Akrapovic, the latter one being the number one specialist in delivering the most advanced exhaust systems.

As common to other customized BMW models, this lad here is also wrapping Vorsteiner styling components, including the tuner`s EVO Front Spoiler as well as the GTS Rear Diffuser. The rear end was Akrapovic`s responsibility, the model being fitted with the high-performance Evolution exhaust system, providing the model with a wilder engine accoustic.

The overall new styling is complemented by the one-off ADV05R M.V2 Competition Spec directional alloy wheels, which are the tuner`s latest forged and lightweight wheels.

They are sized 20×9.5 and 20×11 front and rear, and finished in Brushed Gunmetal, which make it extremely appealing with the car`s Alpite white body wrap. A new set of H&R Lowering Springs was also added, which makes the M3 more aggressive.

From what we know so far, there aren`t any mods carried out under the hood, our BMW M3 still packing the same 3.0-liter M TwinPower Turbo inline flat-six engine, with 431 horsepower and 500 Nm of torque. Hooked to a seven-speed dual clutch transmission, the M3 is capable of sprinting from 0 to 100 km/h in just 4.1 seconds, at a topping of 250 km/h.

The finished product can be admired in the photo gallery below, released by Thomas Van Rooij Photography. Enjoy and tell us what you think about the model!

About Post Author

Marcus M.

http://www.bmwcoop.com

The post Alpine White BMW M3 with Exquisite Amenities Gets Photo Session appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

A lot of BMW petrol heads out there consider the BMW X5 M in its previous generation a much better looking and hotter SUV than the current X5 M.

Ever since its introduction on the market in 2009, this old lad here has been the subject of different outstanding customization tuning programs, the latest coming from Wheels Boutique tuner.

We are not dealing here with a complete body styling package, the owner of this exquisite BMW X5 M wanting just some cool wheels that would make it a real eye-catcher.

Thus, technicians over Wheels Boutique have fitted the model with the forged ADV5.2 MV.2 Super Light wheels, courtesy to ADV.1 Wheels tuner, which provide the SUV with better looks and improved stance.

Apart the wheels, there were no body mods carried out, the X5 M already coming with a factory aggressive body styling.

In the engine department, the BWM X5 M is packing a 4.4-liter V8 M mill, with 555 horsepower and 500 lb-ft of torque, achieved between 1,500 rpm – 5,650 rpm. The engine also adds the high-tech twin-scroll twin turbo technology with High Precision Direct Injection.

All these powertrain configurations allow a sprint from 0 to 100 km/h in just 4.5 seconds, at a topping of 250 km/h. Wheels Boutique has also released a photo gallery with their latest project carried out on the gorgeous BMW X5 M, enjoy and don’t forget that your opinion does count!

About Post Author

Marcus M.

http://www.bmwcoop.com

The post BMW X5 M Wrapped in ADV.1 Wheels, Installation by Wheels Boutique appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

We still can`t comprise all the attributes to praise the BMW X6 M SUV, the most powerful SUV built by the German maker, but since we have seen it customized in different aftermarket programs, this is the real proof of how respected and adored is this genuine piece of German engineering.

The latest program comes from TAG Motorsports, which has fitted the SUV with the high-performance wheels from ADV.1 Wheels tuner.

We are dealing here with the V005 Deep Concave Competition Spec alloy wheels which highlight the car`s Long Beach Blue body wrap and add greater stance and improved personality.

The V005 Deep Concave wheels measure 22×10.5 and 22×12 front and rear, all finished in a combination of Brushed Gunmetal lips and Polished Smoke centers.

TAG Motorsports have left the engine intact, the high-end model packing the stock 4.4-liter V8 TwinPower Turbo mill, which develops 423 horsepower between 6,000 rpm – 6,500 rpm. The sprint from 0 to 100 km/h is done in just 4.2 seconds, at a topping of 250 km/h.

The BMW X6 M also features two TwinScroll turbochargers, VALVETRONIC, cross-bank exhaust manifolds, or High Precision Direct Petrol Injection.

Below, the photo gallery offers a closer look at this marvelous project.

About Post Author

Marcus M.

http://www.bmwcoop.com

The post BMW X6 M Looks Almighty on ADV.1 Wheels appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.

The F80 BMW M3 has been recently the subject of another tuning program carried out by the aftermarket specialists from TAG Motorsports tuning company.

As we can judge from the pictures, this BMW M3 is wearing a cool carbon fiber aero body kit, with new parts, exclusively chosen by TAG Motorsports.

We might thus depict the new front lip spoiler, deck lid spoiler as well as the rear diffuser with the outstanding exhaust system from AWE Tuning, with the 90mm Diamond Black tips, which make the M3 more aggressive and wilder.

Apart the exclusive carbon fiber parts, the entire body wrap is complemented by the one-off 19-inch ADV.1 wheels, sized 10-inch and 12-inch front and rear and being fitted with the high-performance Michelin Pilot Super Sports rubbers, measuring 275/20/19 and 295/30/19. The alloys are finished in Polished Matte Titanium.

Under the hood, the F80 BMW M3 is packing the same stock 3.0-liter turbocharged engine, also found on its sibling M4 Coupe, developing a great total output of 425 horsepower and good 560 Nm of torque.

The sedan is thus capable of sprinting from 0 to 100 km/ in just 4.3 seconds when hooked to a six-speed manual transmission, but with a seven-speed DCT, the M3 is capable of reaching 100 km/h in 3.9 seconds.

About Post Author

Marcus M.

http://www.bmwcoop.com

The post F80 BMW M3 Sits on ADV1 Wheels, Installation by TAG Motorsports appeared first on BMWCoop | BMW Blog, BMW News, BMW Reviews.